How much does a 3D printer cost per month in Oklahoma?

About 77.4¢ a month, assuming 120 W at a 60% duty cycle, 6 hours a day, 150 days a year at 14.33¢/kWh.

How many kilowatt-hours does a 3D printer use?

Roughly 65 kWh a year under these assumptions, or 0.07 kWh for every hour it runs.

Is that expensive compared with other states?

Oklahoma has the 9th cheapest average residential rate in the country, so this appliance costs less here than the U.S. average of $11.88 a year.

Home › 3d printer › Oklahoma

Cost to run a 3D printer in Oklahoma (June 2026 rates)

At 14.33¢ per kilowatt-hour — Oklahoma's average residential price in June 2026 — running a 3D printer costs $9.29 a year. That is 22% less than the national average of $11.88. Oklahoma's residential rate is up 5.1% from June 2025, which moves this appliance from $8.83 to $9.29 a year.

Per hour: 1.0¢
Per day of use: 6.2¢
Per month: 77.4¢
Per year: $9.29

Assumption: 120 W at a 60% duty cycle, 6 hours a day, 150 days a year — 65 kWh a year. A consumer FDM printer mid-print. The heated bed dominates the draw, and an enclosure lowers the duty cycle by holding heat in. Use the calculator to swap in the numbers from your own model.

How Oklahoma compares

Oklahoma pays 14.33¢/kWh, the 9th cheapest residential electricity of the 51 U.S. jurisdictions EIA reports. For this appliance that works out to $2.60 less a year than the typical U.S. household pays for the same use. Running the same 3D printer costs $8.50 a year in Nevada and $34.16 in Hawaii, so where you live changes this bill by $25.67 a year.

State	Rate	Per month	Per year
Arkansas	14.12¢	76.2¢	$9.15
Kentucky	14.26¢	77.0¢	$9.24
Oklahoma	14.33¢	77.4¢	$9.29
Idaho	14.37¢	77.6¢	$9.31
North Carolina	14.74¢	79.6¢	$9.55

States ranked by average residential price, cheapest first. See all 51 states for a 3D printer.

What else costs about the same in Oklahoma

Computer monitor$8.60 a year in OK Security camera$6.28 a year in OK Ceiling fan$12.38 a year in OK

Cutting the number down

The heated bed, not the hotend, is the load. Lowering bed temperature after the first layers cuts the average draw.
Long prints are cheap per hour but numerous: a week of continuous printing is a real line item.

Questions

How much does a 3D printer cost per month in Oklahoma?: About 77.4¢ a month, assuming 120 W at a 60% duty cycle, 6 hours a day, 150 days a year at 14.33¢/kWh.
How many kilowatt-hours does a 3D printer use?: Roughly 65 kWh a year under these assumptions, or 0.07 kWh for every hour it runs.
Is that expensive compared with other states?: Oklahoma has the 9th cheapest average residential rate in the country, so this appliance costs less here than the U.S. average of $11.88 a year.